HyperX Computer Hardware Price in Malaysia for December, 2018

55 Products
×
We are working hard on getting this feature ready for you. Stay tuned!
Compare Prices
HyperX Impact DDR4
RM 229.00
5 Stores
Stay ahead of the curve with next-gen DDR4 SODIMM. Get your notebook or small-form-factor machine fully equipped with HyperX® Impact DDR4 SODIMM and minimise system lag. XMP-ready in capacities of up to 64GB, Plug n Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz1, to support Intel and AMD’s latest CPU technologies2. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run coolly, quietly and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage. Keep your notebook or small-form-factor machine ahead of the curve with HyperX® Impact DDR4 SODIMM and crank the settings up. It’s optimised for Intel’s Series 100 and 200 chipsets and tested for compatibility with leading motherboard manufacturers. Available in capacities of up to 64GB, it features low CL13, CL14 and CL15 latencies, higher memory bandwidth and speeds up to 2666MHz1 to power through everything. It auto-overclocks for peak performance and runs efficiently at 1.2V. Features Optimised for the latest Intel and AMD CPUs Powerful SODIMM performance Optimised for Intel’s Series 100 and 200 chipsets to help future-proof your system 4GB–16GB capacities, frequencies up to 3200MHz Automatic overclocking for a hassle-free boost XMP-ready profiles for easy custom tuning Uses Plug N Play automatic overclocking functionality Intel XMP-ready profiles make setup simple Low 1.2 DDR4 standard voltage for cool, efficient performance Slim black thermal label and black PCB Read more
Compare Prices
HyperX Impact DDR4 2133MHz 8GB
RM 229.00
3 Stores
Stay ahead of the curve with next-gen DDR4 SODIMM. Get your notebook or small-form-factor machine fully equipped with HyperX® Impact DDR4 SODIMM and minimise system lag. XMP-ready in capacities of up to 64GB, Plug n Play HyperX Impact DDR4 automatically overclocks to the highest frequency published, up to 3200MHz1, to support Intel and AMD’s latest CPU technologies2. Slot in the sleek black PCB for a hassle-free boost, no need to tinker with the BIOS. Upgrade your system’s performance and still run coolly, quietly and efficiently, thanks to HyperX Impact DDR4’s low 1.2 voltage. Keep your notebook or small-form-factor machine ahead of the curve with HyperX® Impact DDR4 SODIMM and crank the settings up. It’s optimised for Intel’s Series 100 and 200 chipsets and tested for compatibility with leading motherboard manufacturers. Available in capacities of up to 64GB, it features low CL13, CL14 and CL15 latencies, higher memory bandwidth and speeds up to 2666MHz1 to power through everything. It auto-overclocks for peak performance and runs efficiently at 1.2V. Features Optimised for the latest Intel and AMD CPUs Powerful SODIMM performance Optimised for Intel’s Series 100 and 200 chipsets to help future-proof your system 4GB–16GB capacities, frequencies up to 3200MHz Automatic overclocking for a hassle-free boost XMP-ready profiles for easy custom tuning Uses Plug N Play automatic overclocking functionality Intel XMP-ready profiles make setup simple Low 1.2 DDR4 standard voltage for cool, efficient performance Slim black thermal label and black PCB Read more
Compare Prices
HyperX Fury DDR4 2666MHz 8GB Black
RM 327.40
3 Stores
HyperX Fury Ddr4 An easy Plug N Play performance boost for your PC. HyperX Fury Ddr4 detects your system’s components and automatically overclocks itself to the highest published frequency, up to 3466MHz, for a Plug N Play performance boost. This cost-effective upgrade will let you crank up the settings on your favourite Fps, MMO and Moba games and provide better video editing and rendering performance. It’s available in speeds from 2400MHz–3466MHz; Cl15–19 latencies, single module capacities of 4Gb–16Gb and kit capacities of 16Gb–64Gb. HyperX Fury Ddr4 looks and stays cool, thanks to its stylish, low-profile heat spreader and DDR4’s low 1.2V power consumption. One hundred per cent tested at speed and backed by a lifetime warranty, HyperX Fury Ddr4 is your worry-free upgrade of choice. *HyperX PnP memory will run in most Ddr4 systems up to the speed allowed by the manufacturer's system Bios. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's Bios. Automatic overclocking – Up to 3466MHz1 Cost-efficient, high-performance Ddr4 upgrade Intel XMP support for the latest processor technologies Run cool with energy-efficient 1.2V Ddr4 Signature asymmetrical Fury design with low-profile heat spreader Backed by a lifetime warranty Memory Package type Dimm Compatible chipsets Intel® X99 Intel Extreme Memory Profile (Xmp) Yes Memory layout (modules x size) 1 x 8 GB Internal memory 8 GB Component for PC/server Memory form factor 288-pin Dimm CAS latency 16 Memory voltage 1.2 V Lead plating Gold Unbuffered memory Yes SPD profile Yes Memory type Pc4-21300 Memory clock speed 2666 MHz Internal memory type Ddr4 Power Memory voltage 1.2 V Technical details Colour of product Black Cooling type Heatsink Number of pins 288 System requirements Windows operating systems supported Yes Mac operating systems supported Yes Linux operating systems supported Yes Operational conditions Operating temperature (T-T) 0 - 85 °C Storage temperature (T-T) -55 - 100 °C Read more
Compare Prices
HyperX Fury DDR4 2666MHz 16GB Black
RM 1,094.00
2 Stores
Hx426C16Fb/16 16Gb 2G x 64-Bit Ddr4-2666 Cl16 288-Pin Dimm Descriptions: HyperX Hx426C16Fb/16 is a 2G x 64-bit (16Gb) Ddr4-2666 Cl16 Sdram (Synchronous Dram) 2Rx8, memory module, based on sixteen 1G x 8-bit Fbga components per module. Each module supports Intel® Extreme Memory Profiles (Intel® Xmp) 2.0. Each module has been tested to run at Ddr4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The Jedec standard electrical and mechanical specifications are as follows: Specifications: Cl(Idd): 16 cycles Row Cycle Time (tRCmin): 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.) Row Active Time (tRASmin): 29.25ns(min.) Maximum Operating Power: TBD W* (*Power will vary depending on the Sdram used.) UL Rating: 94 V - 0 Operating Temperature: 0° C to +85° C Storage Temperature: -55° C to +100° C Features: Power Supply: VDD = 1.2V Typical Vddq = 1.2V Typical VPP - 2.5V Typical Vddspd = 2.2V to 3.6V Nominal and dynamic on-die termination (Odt) for data, strobe, and mask signals Low-power auto self refresh (Lpasr) Data bus inversion (Dbi) for data bus On-die Vrefdq generation and calibration Dual-rank On-board I2 serial presence-detect (Spd) Eeprom 16 internal banks; 4 groups of 4 banks each Fixed burst chop (Bc) of 4 and burst length (Bl) of 8 via the mode register set (Mrs) Selectable BC4 or BL8 on-the-fly (Otf) Fly-by topology Terminated control command and address bus Height 1.340” (34.04mm), w/o heatsink Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your Bios. Jedec/xmp Timing Parameters JEDEC/PnP: Ddr4-2666 Cl16-18-18 @1.2V XMP Profile #1: Ddr4-2666 Cl16-18-18 @1.2V Read more
Go to Shop
HyperX Fury DDR4 2400MHz 4GB Black
RM 308.80
Ezi Buy

Hx424C15Fb/4 4GB 512M x 64-Bit Ddr4-2400 Cl15 288-Pin Dimm Description: HyperX Hx424C15Fb/4 is a 512M x 64-bit (4Gb) Ddr4-2400 Cl15 Sdram (Synchronous Dram) 1Rx8, memory module, based on eight 512M x 8-bit Fbga components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® Xmp) 2.0. Each module has been tested to run at Ddr4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The Jedec standard electrical and mechanical specifications are as follows: Specifications: Cl(Idd): 15 cycles Row Cycle Time (tRCmin): 46.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin): 260ns(min.) Row Active Time (tRASmin): 29.125ns(min.) Maximum Operating Power: TBD W* (*Power will vary depending on the Sdram used.) UL Rating: 94 V - 0 Operating Temperature: 0° C to +85° C Storage Temperature: -55° C to +100° C Features: Power Supply: VDD = 1.2V Typical Vddq = 1.2V Typical VPP - 2.5V Typical Vddspd = 2.2V to 3.6V Nominal and dynamic on-die termination (Odt) for data, strobe, and mask signals Low-power auto self refresh (Lpasr) Data bus inversion (Dbi) for data bus On-die Vrefdq generation and calibration Single-rank On-board I2 serial presence-detect (Spd) Eeprom 16 internal banks; 4 groups of 4 banks each Fixed burst chop (Bc) of 4 and burst length (Bl) of 8 via the mode register set (Mrs) Selectable BC4 or BL8 on-the-fly (Otf) Fly-by topology Terminated control command and address bus Height 1.340” (34.04mm), w/heatsink Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your Bios. Jedec/xmp Timing Parameters JEDEC/PnP: Ddr4-2400 Cl15-15-15 @1.2V Ddr4-2133 Cl14-14-14 @1.2V XMP Profile #1: Ddr4-2400 Cl15-15-15 @1.2V

Read more

Top HyperX Computer Hardware Price List 2018

Top 10 products Price Store
HyperX Fury DDR4 RM 241.00 Lazada
HyperX Fury DDR3 RM 23.50 AliExpress
HyperX Savage DDR3 RM 150.00 Lazada
HyperX Impact DDR4 RM 229.00 Shopee
HyperX Impact DDR3 RM 270.00 Lazada
HyperX Fury DDR3 1866MHz 8GB Black RM 225.00 Lazada
HyperX Fury DDR3 1600MHz 8GB Black RM 225.00 Lazada
HyperX Fury DDR3 1866MHz 8GB Red RM 119.90 AliExpress
HyperX Fury DDR3 1866MHz 4GB Red RM 126.00 Lazada
HyperX Fury DDR3 1866MHz 8GB Blue RM 225.00 Lazada
Most Popular
HyperX Fury DDR4

Cheapest at Lazada RM 350.00 RM 241.00 Go to Shop

HyperX Computer Hardware Malaysia

HyperX Fury DDR4, HyperX Fury DDR3 and HyperX Savage DDR3, are the two most popular HyperX Hardware from the brand.', If HyperX Hardware doesn't suit your taste, you can also check out louis will, Cooler Master and ASUS online. On iPrice Malaysia, HyperX Hardware are offered in a price range from RM 24.00 to RM 2,224.00. You can find among RAM and Fans & Cooling. White, Red and Blue are the most popular HyperX Hardware colours. mixed.get_discount_on_brand_cat