Details: 100% Brand New and High Quality * It is suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate and the washing machine of metal plate. * Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc. * Color: Purple * Material: Plastic * Compatible With: Fit for VW: Golf, Sagita, Beetle, Caddy, Passat, Polo, Jetta Fit for Mercedes-Benz: A / B / C / E / M / S Class, CLA, GLK, CLS Fit for Audi: A3, A4, A5, A6, A8 Fit for BMW: 1 / 3 / 4 / 5 / 7 Series, X1, X3, X4, X5, X6 Fit for Mazda: 3, 6, CX-5, CX-7 Fit for Hyundai: ix35, Santa Fe, Tucson, Sonata, Elantra Fit for Honda: Accord, City, Civic, CR-V, Odyssey, Fit Fit for Chevrolet: Cruze, Malibu, Tahoe, Suburban Fit for Kia: Optima, Rio, Sportage, Fit for Peugeot: 206, 207, 308, 406, 407 Fit for Ford: Focus, Edge, Fusion, Mustang, Fit for Suzuki: Swift, SX-4 Fit for Toyota: Camry, 4Runner, Corolla, Highlander, Prius, Sienna, Yaris How to use: Mount the glue stick into the glue gun and preheat for 5 minutes. * Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is). * Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue). * Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter). * Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; * Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. * Clean the repaired place with a clean wet cloth. Package Content: 24* Car Dent repair Puller Pads Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.