Hey, we’d like to know what you think of us
Happy
Frown
Happy
Frown
Skip
Thanks!
Go to top
14 products found
BrilliantColor™ Technology For premium image quality, the Lv-S300 is equipped with BrilliantColor™ technology, which uses a new colour-processing algorithm to ensure more realistic and precise colours. Instead of a conventional 4-colour wheel, the new LV projectors incorporate a 6-colour wheel for richer and brighter colour reproduction. In cases where users have to project against coloured walls instead of a white surface, the Screen Colour feature helps to colour-correct the images to match the colour of the projected surface. Minimum Maintenance for Maximum Durability Equipped with a lamp system which does not require the use of air filters, maintenance and operating costs have been significantly reduced. The lamp is also durable and long-lasting, and when used in eco-mode, has a long life-span of about 6000 hours. Direct Power Off By simply pulling the power cable from the projector after use, power can be turned off without pressing the Power button on the remote or operation panel. This is especially useful when the projector has to be stowed away or moved immediately after use Type Product type Projector Imaging device, number DMD x1 DMD Number of pixels 800 x 600 (Svga) Size / Aspect ratio 0.55 type, 4:3 Projection lens Zoom ratio / Focal length / F value 1.1x / 21.0 – 23.1mm / F2.56 – 2.8 Projection distance W: 2.3 - 5.7m T: 2.5 - 5.0m Projection distance for 100” 3.8 – 4.2m Projection ratio 2.04:1 - 1.86:1 Operation Zoom: manual, Focus: manual Light source Lamp type Super-high pressure mercury lamp Lamp power 190 / 160W (Lamp mode: normal / eco) Images Optical system Time division colour extraction, sequential display Brightness 3000 / 2100lm (Lamp mode: normal / eco) Marginal lumination ratio 80% Contrast ratio 2300:1 Image size W: 60 – 150 type T: 60 – 120 type Amount of lens shift 60%, fixed Electrical zoom (by length) 2x maximum Keystone correction range V ±30° Image signal Analog PC input Uxga / Sxga+ / Wxga+ / Fwxga / Wxga / Sxga / XGA / Svga / VGA / MAC Component video input 1080p / 1080i / 720p / 576p / 576i / 480p / 480i Video input Ntsc / PAL / Secam / Ntsc4.43 /P Al-M / Pal-N / Pal-60 S video input Ntsc / PAL / Secam / Ntsc4.43 /P Al-M / Pal-N / Pal-60 Terminal Mini D-sub 15pin x 2 Analog RGB / Component video input RCA Composite video input Mini Jack Stereo audio input Mini Jack Stereo audio output Dsub9 Rs-232C connection USB type B Service port Mechanics Adjustable feet Front: 1, Rear: 1 (the angle of elevation of up to 6°) Speaker 2W monaural Dimensions (W x H x D) W: 282mm, H: 114.5mm, D: 232mm (including protrusion) W: 282mm, H: 91mm, D: 232mm (not including protrusion) Weight 2.5kg (5.5lbs) Noise 35 / 29dB Others Power supply Ac100V - 240V 50 / 60Hz Power consumption 330W / 275W (Lamp mode: normal / eco) Standby power consumption 3.0W (Standby) When setting is: Standby LAN:On 0.5W (Standby) When setting is: Standby LAN:Off Operating temperature 0°C (32°F) to 40°C (104°F) Accessories Remote control, remote control dry-cell batteries, power cord, PC cable, User's Manual, Important Information and Warranty Card
The Xeed Wux450 is a compact install model packed with advanced technologies like the new Aisys 5.0 for better brightness, eco performance and usability. It also provides high image quality with Canon's optical and image processing technology. Compact install Lens shift models with non-interchangeable lens 4500 Lumens, Wuxga resolution (1920 x 1200) Aisys 5.0 Newly developed optics with energy efficient design for lower power consumption, improved brightness, contrast and optimized light efficiency, in a more compact structure. Constant F.no, 2.8 Xeed Wux450 is equipped with a 1.8x projection lens with a fixed F.no 2.8 for consistent brightness throughout their entire specified projection distance. F.no 2.8 provides a deeper depth of field, delivering clear image quality and makes it easy to bring the entire screen into focus even when projecting onto a screen from an angle or projecting onto an uneven surface. Advanced adjustment functions - 4-point keystone correction Xeed WUX450's 4 corner Keystone Correction adjustment method enables precise fitting to real-world screens; screen slant, imperfect screen aspect ratio, etc, and are all compensated for by the precision adjustment of just 4 points. Canon's newly developed imaging engine greatly minimizes poor resolution and moiré usually caused by keystone correction, projecting beautiful images even when applying 4-point keystone adjustment. Together with the projectors constant F.no 2.8 lens, image sharpness is ensured from corner to corner throughout its entire projection distance. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / aspect ratio 0.71" x 3 / 16:10 Drive system Active matrix system Number dots / total number dots 2,304,000 (1920 x 1200) x 3 panels / 6,912,000 Projection lens Zoom ratio 1.8x Focal length f = 21.7 - 39.0mm F value F2.8 Zooming Manual Focusing system Manual Lens shift V: 0% - +60% H: ±10% Light source 250-Nsha Image size (projection distance) Size 40 to 300 (1.2m to 16.2m) Number of colours 16,770,000 colours (full colour) Brightness 4,500 lumens (during presentation) Contrast ratio 2000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 90% Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) / Analog PC Hdmi IN terminal Digital PC / Digital Video Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) USB terminal USB Type A Audio IN terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT terminal Audio signal (3.5ø stereo mini jack) Wired remote control connection 3.5ø mini jack x1 LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 38 / 32dB Operating temperature 0°C - 40°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 365W Silent mode 295W Standby 0.6W Standby with LAN OFF 0.2W Dimensions (W x D x H) 337 x 362 x 118mm (not including protrusions) Weight 5.9kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
A newly-developed superior Lcos panel paired with the Aisys 4.1 optical system empowers the projector with the ability to project images with richer and more life-like colour. 2000:1 contrast ratio Brightness: 6000 lumens Wuxga (1920 x 1200 pixels) Exceptional brightness With a generous 6000 lumens brightness and 2000:1 contrast ratio, this projector delivers clear, well-defined images. Superb colour reproduction is ensured and it brings out true blacks in dark scenes, for a better viewing experience. Dicom Sim* Designed for use in the field of medical education, Dicom mode 14** accurately displays high-resolution grayscale images, such as X-rays and CAT scans where crucial information can be found in subtle differences. * The Dicom Simulation Mode is not approved for medical diagnosis and should not be used for these purposes. ** Compliant with the Digital Imaging and Communications in Medicine (Dicom) display standard. Interchangeable lens The Xeed WUX6000's high-resolution optional interchangeable lenses, which comprises the Standard Zoom lens, Long Zoom lens, Ultra long Zoom lens, Fixed Short-Focus lens and Short Focus Zoom Lens, giving users an amazing amount of display flexibility at a range of distances. The top-grade lenses share the same engineering quality as Canon's coveted EOS Dslr lenses, projecting images with minimal brightness loss while negating on-screen distortion. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / Aspect ratio 0.71" x 3 / 16:10 Drive system Active matrix system Number dots / Total Number dots 2,304,000 (1920 x 1200) x 3 panels / 6,912,000 Projection lens Zoom ratio 1.5x Focal length f = 23.0 - 34.5mm F value F1.89 - F2.65 Zooming Electric Focusing system Electric Lens shift V: -15% to +55% H: ±10% Light source 340-Nsha 340W Image size (projection distance) Size 40 to 600 (1.3m to 29.0m) Number of colours 16,770,000 colours (full colour) Brightness 6,000 lumens (during presentation) Contrast ratio 2000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 88% (during presentation) Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Wxga / Sxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Wxga / Sxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) Hdmi IN terminal Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) Audio IN Terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT Terminal Audio signal (3.5ø stereo mini jack) USB port Jpeg images (Usb Mass Storage Class) Remote terminal Wired remote control (3.5ø stereo mini jack) LAN terminal Network connection (Rj-45) Control terminal Rs-232C (D-sub 9-pin) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / power saver mode) 40 / 36dB Operating temperature 0°C - 40°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 455W Power saver mode 360W Standby 0.7W Standby with LAN OFF 0.3W Dimensions (W x D x H) 380 x 430 x 170mm Weight 8.5kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
The Xeed Wx520 is a compact install model packed with advanced technologies like the new Aisys 5.0 for better brightness, eco performance and usability. It also provides high image quality with Canon's optical and image processing technology. Compact install Lens shift models with non-interchangeable lens 5200 Lumens, Wxga+ resolution (1440 x 900) Aisys 5.0 Newly developed optics with energy efficient design for lower power consumption, improved brightness, contrast and optimized light efficiency, in a more compact structure. Constant F.no, 2.8 Xeed Wx520 is equipped with a 1.8x projection lens with a fixed F.no 2.8 for consistent brightness throughout their entire specified projection distance. F.no 2.8 provides a deeper depth of field, delivering clear image quality and makes it easy to bring the entire screen into focus even when projecting onto a screen from an angle or projecting onto an uneven surface. Advanced adjustment functions - 4-point keystone correction Xeed WX520's 4 corner Keystone Correction adjustment method enables precise fitting to real-world screens; screen slant, imperfect screen aspect ratio, etc, and are all compensated for by the precision adjustment of just 4 points. Canon's newly developed imaging engine greatly minimizes poor resolution and moiré usually caused by keystone correction, projecting beautiful images even when applying 4-point keystone adjustment. Together with the projectors constant F.no 2.8 lens, image sharpness is ensured from corner to corner throughout its entire projection distance. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / aspect ratio 0.7" x 3 / 16:10 Drive system Active matrix system Number dots / total number dots 1,296,000 (1440 x 900) x 3 panels / 3,780,000 Projection lens Zoom ratio 1.8x Focal length f = 21.7 - 39.0mm F value F2.8 Zooming Manual Focusing system Manual Lens shift V: 0% - +62% H: ±10% Light source 250-Nsha Image size (projection distance) Size 40 to 300 (1.2m to 16.6m) Number of colours 16,770,000 colours (full colour) Brightness 5,200 lumens (during presentation) Contrast ratio 2000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 90% Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) / Analog PC Hdmi IN terminal Digital PC / Digital Video Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) USB terminal USB Type A Audio IN terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT terminal Audio signal (3.5ø stereo mini jack) Wired remote control connection 3.5ø mini jack x1 LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 38 / 32dB Operating temperature 0°C - 40°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 355W Silent mode 285W Standby 0.6W Standby with LAN OFF 0.2W Dimensions (W x D x H) 337 x 362 x 118mm (not including protrusions) Weight 5.9kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
The Lv-Wx300Ust features ultra-short throw capability at a close proximity of 28.2cm while projecting images as large as 80-inch. Given this unique ability, installation options are greatly flexible since the projector can be installed just above the screen, thus minimising shadow casted by the presenter. The Lv-Wx300Ust is apt for usage in tight spaces or even at shopfronts for aesthetic display. Brightness: 3000 lumens Contrast ratio: 7500:1 High Wxga resolution (1280 x 800 pixels) Bright & Great Resolution This projector is a portable Wxga model capable of providing light output of 3,000 lumens, makes it a versatile projector for use in various locations. Its contrast ratio is 7500:1 to project sharp and crisp images. Ultra short throw type This projector is an ultra short-throw model that realizes projection ratio of 0.35:1. It offers large screen projection of 80-inch on a screen at a distance as short as 28.2cm. Dual Hdmi The projector is equipped with 2 Hdmi terminals to allow user to create quick and easy presentation with the combination of different digital video inputs. Specifications Model name Lv-Wx300Ust Display system 1-Chip DLP Optical system Time division colour extraction, sequential display Display device Type DMD x 1 Size / Aspect ratio 0.65 type / 16:10 Drive system Active matrix system Number dots / Total Number dots 1,024,000 (1280 x 800) Projection lens Zooming / Focusing system Fixed / Manual Focal length / F value 5.1mm / 2.5 Throw ratio 0:35:1 Projection distance 60.5 – 70.5cm Lens shift 75%, fixed Light source 230W Super-high pressure mercury lamp Image size 80 – 100 type Number of colours 16,770,000 colours (full colour) Brightness 3000 lumen (presentation mode) Contrast ratio 7500:1 (Fully white:fully black, presentation mode) Ratio of brightness at periphery to center* 1 80% Speaker 10W x 2 (stereo) Maximum input resolution 1600 x 1200 Video signals Analog PC input Uxga / Sxga+ / Wxga / Sxga / XGA / Svga / VGA / MAC Digital PC input Uxga / Sxga+ / Wxga / Sxga / XGA / Svga / VGA Digital video 1080p / 1080i / 720p / 576p / 480p Component video input 1080p / 1080i / 720p / 576p / 576i / 480p / 480i Video / S video input Ntsc / PAL / Secam / Ntsc4.43 / Pal-M / Pal-N / Pal-60 Audio Signal Impedance = 47kΩ or more Input terminal Hdmi x 2 Digital PC, digital video input Mini D-sub 15 x 2 Analog PC, Component video input Mini Din4 S-video input RCA Video input 2Rca Audio input Audio IN Audio input (3.5φ stereo mini jack) Output terminal Mini D-sub 15 Monitor out Audio OUT Audio output (3.5φ stereo mini jack) Control terminal Rj45 Network connection (100Base-Tx / 10Base-T) USB type B USB connection (Usb 2.0 compatible) Dsub9 Rs-232 connection Noise 33 / 29dB (Lamp mode: Full power / Power saver) Operating temperature 5°C (41°F) to 40°C (104°F) Power supply Ac100V - 240V, 50 / 60Hz Power consumption 300W / 240W (Lamp mode: Full power / Power saver) Standby power consumption 6.0W / 0.5W (Low power mode: OFF / ON) Dimension s (W x D x H) W: 287.5mm, H: 167.6mm, D: 374.5mm (including protrusion) Weight 5.0kg (11lbs) Accessories Remote control with battery (Lv-Rc10), power cord, VGA cable, User's Manual, Important Information and Warranty Card Optional Projector Remote Controller (with battery) Lv-Rc10 Projector Remote Controller (with battery) Lv-Rc9 Wall-mounting Bracket Lv-Wl02 Replacement parts Replacement Lamp
The Xeed Wux400St is a short-throw compact install model packed with advanced technologies like the new Aisys 5.0 for better brightness, eco performance and usability. It also provides high image quality with Canon's optical and image processing technology. Compact install Lens shift model with short-throw non-interchangeable lens 4000 Lumens, Wuxga resolution (1920 x 1200) Aisys 5.0 Newly developed optics with energy efficient design for lower power consumption, improved brightness, contrast and optimized light efficiency, in a more compact structure. Short-throw shiftable lens Xeed Wux400St features an all-new lens that virtually eliminates distortion (typically 0.1%) and has a throw ratio of 0.557:1, so a 100" image can be projected from just 1.2metres around one third of the throw distance required by conventional projectors. Despite its short focal length, the lens projects images from 30" up to a large 300" diagonal in size. With both vertical and horizontal shift – including an exceptionally wide 75% vertical range – the projector can be discreetly located above or below the screen and is suitable for both front and rear projection. Advanced adjustment functions - 4-point keystone correction Xeed WUX400ST's 4-corner Keystone Correction adjustment method enables precise fitting to real-world screens; screen slant, imperfect screen aspect ratio, etc, and are all compensated for by the precision adjustment of just 4 points. Canon's newly developed imaging engine greatly minimizes poor resolution and moiré usually caused by keystone correction, projecting beautiful images even when applying 4-point keystone adjustment. Together with the projector's F.no 2.7 lens, image sharpness is ensured from corner to corner throughout its entire projection distance. Specifications S Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / Aspect ratio 0.71" x 3 / 16:10 Drive system Active matrix system Number dots / Total Number dots 2,304,000 (1920 x 1200) x 3 panels / 6,912,000 Projection lens Zoom ratio 1.0x optical (fixed) Focal length f = 8.8mm F value F2.7 Zooming Digital - 1.35x Focusing system Manual Lens shift V: 0% - +75% H: ±10% Light source 250-Nsha Image size (projection distance) Size 30 to 300 (0.4m to 4.04m) Number of colours 16,770,000 colours (full colour) Brightness 4,000 lumens (during presentation) Contrast ratio 2000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 80% Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) / Analog PC Hdmi IN terminal Digital PC / Digital Video Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) USB terminal USB Type A Audio IN Terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT Terminal Audio signal (3.5ø stereo mini jack) Wired remote control connection 3.5ø mini jack x1 LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 38 / 32dB Operating temperature 0°C - 40°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 365W Silent mode 295W Standby 0.6W Standby with LAN OFF 0.2W Dimensions (W x D x H) 337 x 362 x 118mm (excluding protrusions) Weight 6.3kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
The Xeed Wux5000 is a Wuxga-Lcos (Liquid Crystal on Silicon) projector capable of producing 5000 lumens. With three optional and interchangeable lenses, the Xeed Wux5000 pushes the benchmarks for visual fidelity in a range of environments. 1000:1 contrast ratio Brightness: 5000 lumens Wuxga (1920 x 1200 pixels) Exceptional brightness With a generous 5000 lumens brightness and 1000:1 contrast ratio, this projector delivers clear, well-defined images. Superb colour reproduction is ensured and it brings out true blacks in dark scenes, for a better viewing experience. Dicom Sim* Designed for use in the field of medical education, Dicom mode 14** accurately displays high-resolution grayscale images, such as X-rays and CAT scans where crucial information can be found in subtle differences. *The Dicom Simulation Mode is not approved for medical diagnosis and should not be used for these purposes. **Compliant with the Digital Imaging and Communications in Medicine (Dicom) display standard. Interchangeable lens The Xeed WUX5000's high-resolution optional interchangeable lenses, which comprises the Standard Zoom lens, Long Zoom lens and Fixed Short-Focus lens, giving users an amazing amount of display flexibility at a range of distances. The top-grade lenses share the same engineering quality as Canon's coveted EOS Dslr lenses, projecting images with minimal brightness loss while negating on-screen distortion. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / Aspect ratio 0.71" x 3 / 16:10 Drive system Active matrix system Number dots / Total Number dots 2,304,000 (1920 x 1200) x 3 panels / 6,912,000 Projection lens Zoom ratio 1.5x Focal length f = 23.0 - 34.5mm F value F1.89 - F2.65 Zooming Electric Focusing system Electric Lens shift V: -15% - +55% H: ±10% Light source 330-Nsha 336 / 264W Image size (projection distance) Size 40 to 600 (1.3m to 29.0m) Number of colours 16,770,000 colours (full colour) Brightness 5,000 lumens (during presentation) Contrast ratio 1000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 88% (during presentation) Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Sxga / Wxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-D IN terminal Digital PC (24-pin DVI connector) Hdmi IN terminal Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) Audio IN Terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT Terminal Audio signal (3.5ø stereo mini jack) LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 40 / 36dB Operating temperature 5°C - 35°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 450W Silent mode 365W Standby 1.7W Standby with LAN OFF 0.35W Dimensions (W x D x H) 380 x 430 x 170mm Weight 8.5kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
With Wxga+ resolution, Full HD support and 4 interchangeable lenses optionsThe Xeed Wx6000 is a Wxga+Lcos (Liquid Crystal on Silicon) projector capable of producing 5700 lumens. With four optional and interchangeable lenses, the Xeed Wx6000 pushes the benchmarks for visual fidelity in a range of environments. 1000:1 contrast ratio Brightness: 5700 lumens Wxga+ (1440 x 900 pixels) Exceptional brightness With a generous 5700 lumens brightness and 1000:1 contrast ratio, this projector delivers clear, well-defined images. Superb colour reproduction is ensured and it brings out true blacks in dark scenes, for a better viewing experience. Dicom Sim* Designed for use in the field of medical education, Dicom mode 14** accurately displays high-resolution grayscale images, such as X-rays and CAT scans where crucial information can be found in subtle differences. * The Dicom Simulation Mode is not approved for medical diagnosis and should not be used for these purposes. ** Compliant with the Digital Imaging and Communications in Medicine (Dicom) display standard. Interchangeable lens The Xeed WX6000's high-resolution optional interchangeable lenses, which comprises the Standard Zoom lens, Long Zoom lens, Ultra long Zoom lens and Fixed Short-Focus lens, giving users an amazing amount of display flexibility at a range of distances. The top-grade lenses share the same engineering quality as Canon's coveted EOS Dslr lenses, projecting images with minimal brightness loss while negating on-screen distortion. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / Aspect ratio 0.71" x 3 / 16:10 Drive system Active matrix system Number dots / Total Number dots 1,296,000 (1440 x 900) x 3 panels / 3,888,000 Projection lens Zoom ratio 1.5x Focal length f = 23.0 - 34.5mm F value F1.89 - F2.65 Zooming Electric Focusing system Electric Lens shift V: -15% - +50% H: ±10% Light source 330-Nsha 336 Image size (projection distance) Size 40 to 600 (0.81m to 12.1m) Number of colours 16,770,000 colours (full colour) Brightness 5,700 lumens (during presentation) Contrast ratio 1000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 88% (during presentation) Speaker 5W monaural x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Sxga / Wxga / XGA / Svga / VGA Digital PC input Wuxga / Uxga / Wsxga+ / Sxga+ / Wxga+ / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) Hdmi IN terminal Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) Audio IN Terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT Terminal Audio signal (3.5ø stereo mini jack) LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 40 / 36dB Operating temperature 5°C - 35°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 435W Silent mode 345W Standby 1.7W Standby with LAN OFF 0.35W Dimensions (W x D x H) 380 x 430 x 170mm Weight 8.5kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate
The Lv-X300St is a lightweight and compact short throw Wxga widescreen projector, weighing only 2.8kg. It features enhanced vibrant colour reproduction and lower operating cost due to its air-filter-free feature, which enables both businesses and end-users to deliver optimum results at a minimum cost. 2300:1 contrast ratio for outstanding readability XGA (1024 x 768 pixels) Brightness: 3000 lumens BrilliantColor™ Technology For premium image quality, the Lv-S300 is equipped with BrilliantColor™ technology, which uses a new colour-processing algorithm to ensure more realistic and precise colours. Instead of a conventional 4-colour wheel, the new LV projectors incorporate a 6-colour wheel for richer and brighter colour reproduction. In cases where users have to project against coloured walls instead of a white surface, the Screen Colour feature helps to colour-correct the images to match the colour of the projected surface. Minimum Maintenance for Maximum Durability Equipped with a lamp system which does not require the use of air filters, maintenance and operating costs have been significantly reduced. The lamp is also durable and long-lasting, and when used in eco-mode, has a long life-span of about 6000 hours. Versatile Performance to Suit your Needs Capable of projecting crisp text and high quality images, even in the most constrained spaces, the Lv-X300St has a resolution of 1024 x 768, and can project a 120-inch image at 1.48m from the screen, or a 60-inch image when at just 0.74m from the screen. Specifications Type Product type Projector Imaging device, number DMD x1 DMD Number of pixels 1024 x 768 (Xga) Size / Aspect ratio 0.55 type / 4:3 Projection lens Zoom ratio / Focal length / F value Fixed / 6.9mm / F2.60 Projection distance 0.74 - 1.48m Projection distance for 100” 1.23m Projection ratio 0.61:1 Operation Focus: manual Light source Lamp type Super-high pressure mercury lamp Lamp power 210 / 170W (Lamp mode: normal / eco) Images Optical system Time division colour extraction, sequential display Brightness 3000 / 2200lm (Lamp mode: normal / eco) Marginal lumination ratio 80% Contrast ratio 2300:1 Image size 60 – 120 type Amount of lens shift 65%, fixed Electrical zoom (by length) 2x maximum Keystone correction range V -18° / +12° Image signal Analog PC input Uxga / Sxga+ / Wxga+ / Fwxga / Wxga / Sxga /xga / Svga / VGA / MAC Digital PC input Uxga / Sxga+ / Wxga+ / Fwxga / Wxga / Sxga / XGA / Svga / VGA Digital video input 1080p / 1080i / 720p / 576p / 480p Component video input 1080p / 1080i / 720p / 576p / 576i / 480p / 480i Video input Ntsc / PAL / Secam / Ntsc4.43 /P Al-M / Pal-N / Pal-60 S video input Ntsc / PAL / Secam / Ntsc4.43 /P Al-M / Pal-N / Pal-60 Terminal Mini D-sub 15pin x 2 Analog RGB / Component video input Hdmi Digital RGB / Digital video input RCA Composite video input Mini Din4 S-video input Mini Jack Stereo audio input Mini Jack Stereo audio output Dsub9 Rs-232C connection Rj45 100Base-Tx / 10Base-T USB type B Service port Mechanics Adjustable feet Front: 1, Rear: 1 (the angle of elevation of up to 6°) Speaker 10W monaural Dimensions (W x H x D) W: 282mm, H: 117.9mm, D: 267.5mm (including protrusion) W: 282mm, H: 91mm, D: 267.5mm (not including protrusion) Weight 2.8kg (6.2lbs) Noise 36 / 29dB Others Power supply Ac100V - 240V 50 / 60Hz Power consumption 330W / 270W (Lamp mode: normal /eco) Standby power consumption 3.0W (Standby) When setting is: Standby LAN:On 0.5W (Standby) When setting is: Standby LAN:Off Operating temperature 0°C (32°F) to 40°C (104°F) Accessories Remote control, remote control dry-cell batteries, power cord, PC cable, User's Manual, Important Information and Warranty Card
The Xeed Wx450St is a short-throw compact install model packed with advanced technologies like the new Aisys 5.0 for better brightness, eco performance and usability. It also provides high image quality with Canon's optical and image processing technology. Compact install Lens shift model with short-throw non-interchangeable lens 4500 Lumens, Wxga+ resolution (1440 x 900 pixels) Aisys 5.0 Newly developed optics with energy efficient design for lower power consumption, improved brightness, contrast and optimized light efficiency, in a more compact structure. Short-throw shiftable lens Xeed Wx450St features an all-new lens that virtually eliminates distortion (typically 0.1%) and has a throw ratio of 0.571:1, so a 100" image can be projected from just 1.23metres around one third of the throw distance required by conventional projectors. Despite its short focal length, the lens projects images from 30" up to a large 300" diagonal in size. With both vertical and horizontal shift – including an exceptionally wide 77% vertical range – the projector can be discreetly located above or below the screen and is suitable for both front and rear projection. Advanced adjustment functions - 4-point keystone correction Xeed WX450ST's 4-corner Keystone Correction adjustment method enables precise fitting to real-world screens; screen slant, imperfect screen aspect ratio, etc, and are all compensated for by the precision adjustment of just 4 points. Canon's newly developed imaging engine greatly minimizes poor resolution and moiré usually caused by keystone correction, projecting beautiful images even when applying 4-point keystone adjustment. Together with the projector's F.no 2.7 lens, image sharpness is ensured from corner to corner throughout its entire projection distance. Specifications Display system RGB liquid crystal system Optical system Colour separation by dichroic mirror / polarizing beam splitter and colour composition by prism Display device Type Reflective liquid crystal panel Size / Aspect ratio 0.70" x 3 / 16:10 Drive system Active matrix system Number dots / Total Number dots 1,296,000 (1440 x 900) x 3 panels / 3,888,000 Projection lens Zoom ratio 1.0x optical (fixed) Focal length f = 8.8mm F value F2.7 Zooming Digital - 1.35x Focusing system Manual Lens shift V: 0% - +77% H: ±10% Light source 250-Nsha Image size (projection distance) Size 30 to 300 (0.4m to 4.04m) Number of colours 16,770,000 colours (full colour) Brightness 4,500 lumens (during presentation) Contrast ratio 2000:1 (Full white: Full black, during presentation) Ratio of brightness at periphery to center 80% Speaker 5W monaural x 1 Maximum input resolution 1440 x 900 dots Video signals Analog PC input Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Digital PC input Uxga / Wsxga+ / Sxga+ / Wxga+ / Fwxga / Sxga / Wxga / XGA / Svga / VGA Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p Hdmi input 1080p, 1080i, 720p, 576p, 480p Input terminal Dvi-I IN terminal Digital PC (29-pin DVI connector) / Analog PC Hdmi IN terminal Digital PC / Digital Video Hdmi (deep colour) Analog PC / Component IN terminal Analog PC, Component (mini D-sub 15-pin) Control terminal Rs-232C (D-sub 9-pin) USB terminal USB Type A Audio IN Terminal Audio signal (3.5ø stereo mini jack x 2) Audio OUT Terminal Audio signal (3.5ø stereo mini jack) Wired remote control connection 3.5ø mini jack x1 LAN terminal Network connection (Rj-45) Input signal Digital PC Tmds (Transition Minimized Differential Signaling) Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component video Component: Separate Y Cb / Pb Cr / Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb / Pb: 0.7Vp-p, impedance = 75Ω Cr / Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise (normal mode / silent mode) 38 / 32dB Operating temperature 0°C - 40°C Power supply Ac100V - 240V 50 / 60Hz Power consumption Normal mode 355W Silent mode 285W Standby 0.6W Standby with LAN OFF 0.2W Dimensions (W x D x H) 337 x 362 x 118mm (excluding protrusions) Weight 6.3kg Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, user's manual / installation manual, warranty certificate