Product Categories

Arduino Computer Cables Price in Malaysia for September, 2018

356 Products
×
We are working hard on getting this feature ready for you. Stay tuned!
Go to Shop
Arduino LilyPad Arduino Compatible 328 , Main Board
RM 17.90
Shopee

Description: The LilyPad Arduino compatible 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wide tabs that can be sewn down and connected with conductive thread. The LilyPad Arduino compatible consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch). LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features. Dimensions: 50mm outer diameter Thin 0.8mm PCB Documents: Schematic: https://cdn.sparkfun.com/datasheets/E-Textiles/Lilypad/SparkFun_LilyPad_Main_Board_v21.pdf Eagle Files: https://cdn.sparkfun.com/datasheets/E-Textiles/Lilypad/SparkFun_LilyPad_Main_Board_v21.zip Hookup Guide (Coming Soon!) Datasheet (ATmega328): https://cdn.sparkfun.com/datasheets/Kits/doc8161.pdf Leah Buechley’s LilyPad Tutorial: http://web.media.mit.edu/~leah/LilyPad/ LilyPad Arduino Documentation: http://www.arduino.cc/en/Main/ArduinoBoardLilyPad GitHub: https://github.com/sparkfun/LilyPad_Arduino_328_Main_Board/tree/v_21 #Arduino #Lilypad

Read more
Go to Shop
Arduino 3D Printer High Current DRV8825 Stepper Driver
RM 13.90
Shopee

Description: The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). Features : Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information) Comparision Table A4988 DRV8825 Max. theoretical current 2A 2.5A Max. microsteps 16 32 PCB color Green Purple Stepper current adjust. trimpo Yes Yes Typical Rs value 0.05 Ohm or 0.1 Ohm or 0.2 Ohm 0.1 Ohm Vref formula (*) I_TripMax= Vref/(8*Rs) I_TripMax= Vref/(5*Rs) Thermal Overload Protection Yes Yes PCB layers 2 4 Small heatsink included Yes Yes IC packaging 5x5mm 28-lead QFN 9.7x6.4mm 28HTSSOP

Read more
Go to Shop −13%
Arduino Ethernet Shield V2.0
RM 26.00 RM 30.00
Shopee

Description The Ethernet Shield V2.0 is finally released and supports both Mega 1280 and 2560. Besides, it also supports micro SD card read/write. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Ardunio Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. These pins cannot be used for general I/O. The shield provides a standard RJ45 ethernet jack. The reset button on the shield resets both the W5100 and the Arduino board. The shield contains a number of informational LEDs: -PWR: indicates that the board and shield are powered -LINK: indicates the presence of a network link and flashes when the shield transmits or receives data -FULLD: indicates that the network connection is full duplex -100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s) -RX: flashes when the shield receives data -TX: flashes when the shield sends data -COLL: flashes when network collisions are detected Compatibility Working with: Arduino Uno, Arduino Mega, Arduino Duemilanove. Dimension: 70mm x 55mm x 10mm

Read more

Arduino Computer Cables Malaysia

Basic colors like Yellow, Multicolour and Green are the most popular colors for Arduino  Cables today in Malaysia. Get 75% off on Arduino Cables, only at iPrice Malaysia! XBee Shield expansion card V03 Bluetooth, / CCTV / LED 12V 2A AC to DC Power Supply Adapter and Mini FT232RL 3.3V 5.5V FTDI USB to TTL Serial Adapter Module for Arduino Port, are the two most popular Arduino Cables from the brand.', There are louis will, Remax and UGREEN available if you are thinking twice about having Arduino Cables. You can get Arduino Cables for as low as RM 8.00 up to as much as RM 486.00 on iPrice Malaysia.  If you are looking for Arduino Cables, you can choose among Computer Adapters and USB Cables.